·内置自动化特征包括距离误差
·内置磁盘驱动
·结实可靠的机箱
·传输收益（损耗），群延迟和功率测量
·传输及返回损耗（或SWR）
·适配器、衰减器、终端、耦合器及RF电桥
·54107A 纯量测试系统（0.001-1.5GHz）
| 54100A系列网络分析仪可提供设备特性。设备包括：放大器、天线、适配器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤器等。先进的软硬件特性可加速生产力和提高准确性。结合自动波段搜索功能加快调节速度。低源同步和高指向性SWR自动测试仪确保准确。 ·快速准确的测量传输、返回损耗及精确性返回损耗、SWR、群延迟、绝对功率和距离误差。 |
|
·晶体源特别稳定和准确。 ·内置自动化特征包括距离误差 ·内置磁盘驱动 ·结实可靠的机箱 ·传输收益（损耗），群延迟和功率测量 ·传输及返回损耗（或SWR） ·适配器、衰减器、终端、耦合器及RF电桥 ·54107A 纯量测试系统（0.001-1.5GHz） |
|
| Analyzer | Measurement modes | Transmission(dB),return loss(dB),SWR(linearSWR),optiona group delay(ns),power(dBm)precision return loss(dB) and optionaldistance-to-fault |
| Dynamic range | -55 to +16dBm,autozeroing with DC detection | |
| Inputs | Three,two standard inputs,A and B,with optionathird reference channel,R(Option 5) | |
| Display channels | Two channels are used to select and simultaneouslydisplay any two inputs fromA,B,or R.The inputs can also be displayed asratios A/R or B/R. | |
| Scale resolution | 0.1 to 10dB(m) per division in 0.1dB steps | |
| Cursor functions | Searches for trace maximum,minimum,dB level,dBbandwidth,next marker and active marker | |
| Averaging | 2,4,8,16,32,64,128,or 256 | |
| Limit lines | Two limit ines,either single value or multilevel segmented,for each trace.Segmented lines may be made from up to 10individually editable segments. | |
| Auto-zero | Performs an AC modulation cycle and lowlevel calibration during sweeper ratrace | |
| Save/Recall | Thirteen sets of front panel set-ups andthirteen sets of trace memory can be stored in non-volatile instrument memory. | |
| Trace mask | A swept frequency measurement can be storedto a graticule trace mask for visual comparison to later measurements. | |
| Disk drive | Built-in 3.5 inch,1.44MB floppy disk drive | |
| Autosave | Automatically increments the trace datafile name and reference number during successive data storage operationsto the DOS disk | |
| Source | Frequency range | 1Mhz to0GHz,model dependent |
| Alternate sweep | Sweep alternately between frequenc yrangesset differently for channel 1 and channel 2 | |
| CW | Provides single frequency output(both channelsturned off) | |
| Frequency resolution | Rf Model(54107A,54109A,54111A):10kHz,Microwavemodels:100khz | |
| Output power | Maximum guaranteed levelled output poweris model dependent. | |
| Reverse power protection | UP to 5 Watts.Limited to 1 Watt with attenuatoroption | |
| Appli- cation function |
Min/Max hold | Save the minimum and maximum values of successivesweeps or the combination of the two |
| Cursor functions | Automatic cursor seach updates the bandwidth,minimum,ormaximum levels of the displayed trace. | |
| Compression test automation | Determines the gain compression point overthe operating freqeuncy range of an ampliffier by successively incrementingthe source power and measuring the amount of compression until a preset"X"dBlimit is exceeded. | |
| Self test | Performs a self test every time power isapplied or when SELF TEST pushbutton is pressed.If an error is detected,adiagnostic code appears,identifying the cause and location of the error. | |
| General | Operating temperature | 0°to 50℃ |
| Power | 48 to 400Hz,300VA | |
| Mass | 18kg(39lb.) | |
| Printer | Parallel printer interface is compatiblewith the Canon BJ30,Bj200e,and most Epson FX-compatible printers. | |
| Transit case | Hard shell case with custom foam inserts,PN:760-183 | |
| EMC | Meets European community requirements forCE marking |
|
|
|